amcPolyproFlow --American Membrane Corporation

SELECT BY INDUSTRY

PRODUCT TYPES

FILTER MEDIA

amcPolyproFlow

amcPolyproFlow pleated cartridge is constructed with all polypropylene components with optimized pleat height and density. It provides universal chemical compatibility, lower pressure loss, and long life in demanding process applications, including pharmaceutical ank biological.

amcPolyproFlow cartridge is available in 8 pore sizes from 0.2 μm to 60 μm to match the flow, differential pressure, and retention requirements of virtually every microfiltration need. No adhesives are used in the fabrication of the chemically resistant amcPolyproFlow cartridge.

amcPolyproFlow cartridge functions equally well as a prefiltration in water and aggressive chemicals, and as a final filter where nominal rated microfiltration is required.

Performance Advantages

All-polypropylene construction offers superior chemical resistance
Cartridge filter incorporates several layers of melt-blown polypropylene web to provide long filter life and outstanding separation performance
Thermal bonding eliminates risk of extractables from sealing materials
Filters are sanitizable by most common methods and sterilizable by autoclave and steam
Filtration medium passes USP Class V1-121°C Plastics Tests for biosafety
Each filter is traceable with engraved product number and pore size for easy identification

Typical Applications

Toiletries, perfumes and colognes, shampoo, creams, lotions, ointments, mouth-washes, oils, make-up water. Serum, blood fractions, tissue culture media, vaccines, liquid growth media, fermentation additives. Rinse water, DI and RO pretreat-ment, acids, bases, paints, gases, audio/video/computer tape and discs, photographic fine chemicals

Materials of Construction
Filter Media:	Pleated non-woven polypropylene
Support Material:	Polypropylene
Structure Components:	Polypropylene
Sealing Technology:	Thermal bonding

Dimensions
Nominal Length:	10, 20, 30, and 40 inch (25.4, 50.8, 76.2, and 101.6 cm)
Diameter:	2.7 inches (6.9 cm)

Nominal Pore Sizes	0.2, 0.45, 1, 3, 5, 10, 30, 60 μm

Typical Effective Filtration Area	0.2, 0.45, 1 μm: 5 ft² (0.5 m²) per 10 inch 3, 5, 10 μm: 6 ft² (0.6 m²) per 10 inch 30, 60 μm: 7 ft² (0.7 m²) per 10 inch

Maximum Operating Temperature	82℃ (180℉) at 10 psi (0.7 bar)
(Supported adapters are recommended for applications at elevated temperature over 60℃)

Sterilization/Sanitization Methods
Autoclave:	121℃ (250℉) for 30 minutes up to 30 cycles
In-line Steam:	134℃ (273℉) for 60 minutes at3 psi (0.21 bar) maximum differential pressure

Maximum Differential Forward Pressure	60 psi (4.1 bar) 60 psi (4.1 bar) at ambient temperature

Maximum Differential Back Pressure	40 psi (2.8 bar) at 60℃ (140℉)

Maximum Continuous Pressure	Limited by housing

Typical Water Flow Rate (10 inch length)

Typical Air Flow Rates (10 inch length)

0.2 μm Filter Retention Efficiency vs. Particle Size

0.45 μm Filter Retention Efficiency vs. Particle Size

1 μm Filter Retention Efficiency vs. Particle Size

3 μm Filter Retention Efficiency vs. Particle Size

5 μm Filter Retention Efficiency vs. Particle Size

10 μm Filter Retention Efficiency vs. Particle Size

30 μm Filter Retention Efficiency vs. Particle Size

60 μm Filter Retention Efficiency vs. Particle Size

Ordering Information P F ■ ■ F ◆▲●
■ Rated Pore Size	92	02 μm
	94	0.45 μm
	01	1 μm
	03	3 μm
	05	5 μm
	10	10 μm
	30	30 μm
	60	60 μm

◆ Nominal Length	1	10 inch (25.4 cm)
	2	20 inch (50.8 cm)
	3	30 inch (76.2 cm)
	4	40 inch (101.6 cm)

● Cartridge Configuration	D	SOE, -020
	F	DOE, Gasket/Gasket 10 inch increments
	J	SOE, -222/Flat/SS*
	K	SOE, -222/Fin/SS*
	M	SOE, -222/Flat
	P	SOE, -222/Fin
	Q	SOE, -226/Fin
	R	SOE, -226/Fin/SS*
	V	SOE, -226/Flat
	W	SOE, -226/Flat/SS*

▲ Seal Material	S	Silicone
	V	Viton
	E	Ethylene Propylene

amcPolyproFlow.pdf