Materials of Construction |
Filter Media: |
Pleated hydrophobic PTFE membrane |
Support Material: |
Polypropylene |
Structure Components: |
Polypropylene |
Sealing Technology: |
Thermal bonding |
|
Dimensions |
Nominal Length: |
10, 20, 30, and 40 inch (25.4, 50.8, 76.2, and 101.6 cm) |
Diameter: |
2.7 inches (6.9 cm) |
|
Nominal Pore Sizes |
0.1, 0.2 μm |
|
Typical Effective Filtration Area |
5.4 ft² (0.50 m²) per 10 inch |
|
Maximum Operating Temperature |
90°C (194°F) at 30 psi (2.1 bar) |
(Supported adapters are recommended for applications at elevated temperature over 60°C)
|
|
Sterilization/Sanitization Methods |
Autoclave: |
121°C (250°F) for 30 minutes up to 30 cycles |
In-line Steam: |
140°C (284°F) for 60 minutes at 2 psi (0.14 bar) up to 20 cycles |
|
Maximum Differential Forward Pressure |
60 psi (4.1 bar) at ambient temperature |
|
Maximum Differential Back Pressure |
15 psi (1.0 bar) at ambient temperature |
|
Recommended Integrity Tests |
|
Minimum Bubble Point: |
0.1 μm: 21 psi (1.5 bar) - ethanol
0.2 μm: 15 psi (1.1 bar) - ethanol |
|
Typical Air Flow Rates |
0.1 μm: 13 cfm/psi/10 inch at atmospheric pressure
(31 Nm³/hr/0.1 bar/25.4 cm)
0.2 μm: 20 cfm/psi/10 inch at atmospheric pressure
(48 Nm³/hr/0.1 bar/25.4 cm) |
|
Typical Non-Volatile Residue |
≤0.01 g /10 inch length in IPA |
|
Endotoxin Level |
<0.25 EU/mL utilizing Limulus Amoebocyte Lysate (LAL) test |
|
Biosafety |
Membrane materials passes USP Class VI-121°C Plastics Test |
|